FERO products

FERO Thermal Tie™ Masonry Connectors

FERO thermal ties and connectors
FERO thermal ties and connectors

About the Product

FERO Thermal Tie™ Masonry Connectors

FERO Thermal Tie™ Masonry Connectors are completely customizable for any size wall cavity. We have designed and engineered products for all types of back-up walls, veneers and construction tolerances.

Benefits:

  • Best-In-Class Thermal Performance
  • Engineering Expertise and Support
  • Can be used with any cavity size, including large cavities up to and including 14"
    Thermal Performance Fact Sheet
    RDH Analysis of FAST Thermal Bracket & Thermal Ties
    Contact Us To Learn More
    Dr. Mike Hatzinikolas

    FERO Thermal Tie™ Masonry Connectors

    All ()
    For Concrete Block ()
    For Insulated Concrete Forms ()
    For Metal Stud ()
    For Poured Concrete ()
    For Wood Studs ()
    For Thin Stone ()
    For Rubble Stone ()
    Miscellaneous Ties ()
    Insulation Support ()
    Image

    Energy Efficiency

    Thermal bridging caused by conventionally installed steel shelf angles profoundly affects the energy efficiency of your wall system, limiting the effectiveness of insulation by over 50%. Standing off the shelf angle allows for continuous insulation behind the shelf angle, reducing thermal bridging by only 14%.
    Image

    Easy Installation

    FAST™ Thermal Brackets are readily available in any size height or depth to accommodate any shelf angle, anchoring system, and backup wall type. Installation is quick and simple—anchor the FAST™ Thermal Bracket into the backup wall and slip the angle in. In most cases, only one trade is needed onsite for the complete installation.
    Image

    Onsite Adjustability

    FAST™ Thermal Brackets offer significantly greater onsite adjustability than conventional angles. Slots on the bracket offer 1- ¾″ of vertical adjustability, and the FAST™ Thermal Bracket can be rotated to ensure the shelf angle is level. Horizontal adjustment is provided by FERO Shim Plates placed behind the bracket.

    Reduce Cost

    The depth of the FAST™ Thermal Bracket can be increased to accommodate any wall cavity size while continuing to use a standard 4×4×1/4” shelf angle. This eliminates the need to use larger, much more expensive shelf angles in walls with thicker insulation and larger cavity sizes.

    The adjustability and ease of installation by a single trade also reduce cost by speeding up installation time and reducing labor costs.

    FERO’s experienced technical staff is available to assist in designing a FAST™ Bracket solution to minimize project materials costs.
    Contact Us To Learn More

    FAST™ thermal bracket configuration

    Image

    FAST™ Thermal Brackets

    Offset your shelf angle from the backup wall.
    Image

    FAST™ Thermal Bracket Inverted

    Maintain aesthetics at openings such as windows and doors.
    Image

    FAST™ Thermal Bracket Lintel System

    Keep the veneer flush to the top of foundation.
    Image

    FAST™ Thermal Bracket - Extended

    Extend the bracket to support veneer below the concrete slab level.
    Image

    Additional Configurations

    Additional Configurations

    Contact Us

    Get in touch to talk about masonry design, our products, technical details and ordering.
    Get Started
    How to Order

    Process an Order

    How to Order

    Ready to get started? Find out next steps to take to place an order with FERO.
    Request a Quote

    Expert Support

    Talk to a FERO expert for help designing the right solution for your building project.
    1.877.703.4463
    Contact FERO support