FERO products

Cladding, Panel and Siding Supports

About the Product

Cladding, Panel and Siding Supports

FERO designs custom, engineered structural connections and supports for masonry and stone veneers.

Benefits:

Engineering Expertise and Support
Custom Solutions

Cladding, Panel and Siding Supports

View Product

CLADDING, PANEL & SIDING SUPPORTS

FERO Thermal Cladding Supports

FERO Thermal Cladding Support is a low-cost, easy-to-install, and thermally-efficient solution for cladding and siding.

View Product

CLADDING, PANEL & SIDING SUPPORTS

FERO Thermal Exterior Panel Support

The FERO Thermal Exterior Panel Support is a low-cost, easy-to-install, and thermally efficient solution for a various exterior paneling systems.

View Product

CLADDING, PANEL & SIDING SUPPORTS

FERO Vented Furring Strip

The FERO Vented Furring Strip creates a vented rainscreen channel between the building wrap and the siding material.

Energy Efficiency

Thermal bridging caused by conventionally installed steel shelf angles profoundly affects the energy efficiency of your wall system, limiting the effectiveness of insulation by over 50%. Standing off the shelf angle allows for continuous insulation behind the shelf angle, reducing thermal bridging by only 14%.

Download Brochure

Thermal Analysis Report

Easy Installation

FAST™ Thermal Brackets are readily available in any size height or depth to accommodate any shelf angle, anchoring system, and backup wall type. Installation is quick and simple—anchor the FAST™ Thermal Bracket into the backup wall and slip the angle in. In most cases, only one trade is needed onsite for the complete installation.

View Installation Guide

Onsite Adjustability

FAST™ Thermal Brackets offer significantly greater onsite adjustability than conventional angles. Slots on the bracket offer 1- ¾″ of vertical adjustability, and the FAST™ Thermal Bracket can be rotated to ensure the shelf angle is level. Horizontal adjustment is provided by FERO Shim Plates placed behind the bracket.

Reduce Cost

The depth of the FAST™ Thermal Bracket can be increased to accommodate any wall cavity size while continuing to use a standard 4×4×1/4” shelf angle. This eliminates the need to use larger, much more expensive shelf angles in walls with thicker insulation and larger cavity sizes.

The adjustability and ease of installation by a single trade also reduce cost by speeding up installation time and reducing labor costs.

FERO’s experienced technical staff is available to assist in designing a FAST™ Bracket solution to minimize project materials costs.